Pneumatic field foam packaging machine is used for packaging all kinds of precision instruments, pneumatic actuators, locks, electronic scales, fans, motors, valves, lamps, auto parts and crafts, etc.
technical parameters：
raw material ratio
1:1（fixed）
Raw material viscosity range
200～1000CPS (at room temperature）
Raw material output
3～5Kg/min or 50～80g/s
emperature setting range
0～90℃
power requirement
single phase 220V 50HZ
Pneumatic working pressure
0.6-0.8MPa
air demand
1m3/min
Heat insulation pipe length
6m
Short pipe length of gun
4m
boundary dimension
1100X480X380
hauled weight
100Kg
This table is a standard model configuration. If it does not conform to the reality, please refer to the additional random "machine configuration list"
spray gun：It mainly plays the role of mixing raw material, switching raw material spraying and controlling flow rate. Our company spray gun with heating device, reduce the raw material flow through the spray gun temperature reduction caused by bad foaming phenomenon. At the same time, through the special throttle supercharging device of the gun head, the raw material mixing is more uniform and the beating is more accurate.
