使用Polyurethane foaming machineFor production, it is not enough to know the model and foaming principle, but also need to know several technical parameters of foaming machine, in order to determine whether to meet their production requirements.

1) yield: the yield is the foam yield, which must be slightly higher than 20% of the required foam yield, so as to leave room for calculation. The yield of the foam yield should be calculated on the basis of the lower limit, not the upper limit;

2) installed capacity: installed capacity is the total installed power, which is of great significance for calculating the adaptability of electrical circuit to the total power consumption;

3) equipment size: this parameter is a necessary factor for the overall layout planning of the workshop;

4) diameter range: generally, it should be controlled according to the requirements of specific products.